[ { "name": "REG__XPG__PCIE__CTRL_000", "offset": "0x0000", "doc": "PCIe controller configuration: Control knobs for enabling datapath features (000). Base demo address would be 0x20100000.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by pcie register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by pcie register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__STATUS_001", "offset": "0x0004", "doc": "PCIe controller configuration: Live status bits sampled from hardware (001). Base demo address would be 0x20100004.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by pcie register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by pcie register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__MASK_002", "offset": "0x0008", "doc": "PCIe controller configuration: Interrupt and event mask settings (002). Base demo address would be 0x20100008.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by pcie register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by pcie register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by pcie register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__COUNT_003", "offset": "0x000C", "doc": "PCIe controller configuration: Saturating event counter value (003). Base demo address would be 0x2010000C.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by pcie register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by pcie register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by pcie register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by pcie register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CFG_004", "offset": "0x0010", "doc": "PCIe controller configuration: Programmable configuration fields (004). Base demo address would be 0x20100010.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by pcie register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by pcie register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__ERR_005", "offset": "0x0014", "doc": "PCIe controller configuration: Sticky error indications cleared by writing one (005). Base demo address would be 0x20100014.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by pcie register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by pcie register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by pcie register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by pcie register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__TIMEOUT_006", "offset": "0x0018", "doc": "PCIe controller configuration: Timeout threshold used by local watchdog logic (006). Base demo address would be 0x20100018.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by pcie register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by pcie register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by pcie register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CAP_007", "offset": "0x001C", "doc": "PCIe controller configuration: Capability and feature discovery register (007). Base demo address would be 0x2010001C.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by pcie register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by pcie register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by pcie register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by pcie register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CTRL_008", "offset": "0x0020", "doc": "PCIe controller configuration: Control knobs for enabling datapath features (008). Base demo address would be 0x20100020.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by pcie register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by pcie register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__STATUS_009", "offset": "0x0024", "doc": "PCIe controller configuration: Live status bits sampled from hardware (009). Base demo address would be 0x20100024.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by pcie register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by pcie register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__MASK_010", "offset": "0x0028", "doc": "PCIe controller configuration: Interrupt and event mask settings (010). Base demo address would be 0x20100028.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by pcie register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by pcie register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by pcie register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__COUNT_011", "offset": "0x002C", "doc": "PCIe controller configuration: Saturating event counter value (011). Base demo address would be 0x2010002C.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by pcie register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by pcie register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by pcie register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by pcie register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CFG_012", "offset": "0x0030", "doc": "PCIe controller configuration: Programmable configuration fields (012). Base demo address would be 0x20100030.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by pcie register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by pcie register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__ERR_013", "offset": "0x0034", "doc": "PCIe controller configuration: Sticky error indications cleared by writing one (013). Base demo address would be 0x20100034.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by pcie register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by pcie register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by pcie register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by pcie register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__TIMEOUT_014", "offset": "0x0038", "doc": "PCIe controller configuration: Timeout threshold used by local watchdog logic (014). Base demo address would be 0x20100038.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by pcie register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by pcie register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by pcie register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CAP_015", "offset": "0x003C", "doc": "PCIe controller configuration: Capability and feature discovery register (015). Base demo address would be 0x2010003C.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by pcie register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by pcie register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by pcie register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by pcie register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CTRL_016", "offset": "0x0040", "doc": "PCIe controller configuration: Control knobs for enabling datapath features (016). Base demo address would be 0x20100040.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by pcie register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by pcie register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__STATUS_017", "offset": "0x0044", "doc": "PCIe controller configuration: Live status bits sampled from hardware (017). Base demo address would be 0x20100044.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by pcie register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by pcie register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__MASK_018", "offset": "0x0048", "doc": "PCIe controller configuration: Interrupt and event mask settings (018). Base demo address would be 0x20100048.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by pcie register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by pcie register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by pcie register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__COUNT_019", "offset": "0x004C", "doc": "PCIe controller configuration: Saturating event counter value (019). Base demo address would be 0x2010004C.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by pcie register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by pcie register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by pcie register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by pcie register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CFG_020", "offset": "0x0050", "doc": "PCIe controller configuration: Programmable configuration fields (020). Base demo address would be 0x20100050.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by pcie register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by pcie register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__ERR_021", "offset": "0x0054", "doc": "PCIe controller configuration: Sticky error indications cleared by writing one (021). Base demo address would be 0x20100054.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by pcie register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by pcie register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by pcie register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by pcie register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__TIMEOUT_022", "offset": "0x0058", "doc": "PCIe controller configuration: Timeout threshold used by local watchdog logic (022). Base demo address would be 0x20100058.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by pcie register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by pcie register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by pcie register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CAP_023", "offset": "0x005C", "doc": "PCIe controller configuration: Capability and feature discovery register (023). Base demo address would be 0x2010005C.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by pcie register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by pcie register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by pcie register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by pcie register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CTRL_024", "offset": "0x0060", "doc": "PCIe controller configuration: Control knobs for enabling datapath features (024). Base demo address would be 0x20100060.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by pcie register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by pcie register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__STATUS_025", "offset": "0x0064", "doc": "PCIe controller configuration: Live status bits sampled from hardware (025). Base demo address would be 0x20100064.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by pcie register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by pcie register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__MASK_026", "offset": "0x0068", "doc": "PCIe controller configuration: Interrupt and event mask settings (026). Base demo address would be 0x20100068.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by pcie register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by pcie register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by pcie register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__COUNT_027", "offset": "0x006C", "doc": "PCIe controller configuration: Saturating event counter value (027). Base demo address would be 0x2010006C.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by pcie register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by pcie register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by pcie register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by pcie register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CFG_028", "offset": "0x0070", "doc": "PCIe controller configuration: Programmable configuration fields (028). Base demo address would be 0x20100070.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by pcie register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by pcie register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__ERR_029", "offset": "0x0074", "doc": "PCIe controller configuration: Sticky error indications cleared by writing one (029). Base demo address would be 0x20100074.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by pcie register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by pcie register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by pcie register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by pcie register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__TIMEOUT_030", "offset": "0x0078", "doc": "PCIe controller configuration: Timeout threshold used by local watchdog logic (030). Base demo address would be 0x20100078.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by pcie register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by pcie register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by pcie register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CAP_031", "offset": "0x007C", "doc": "PCIe controller configuration: Capability and feature discovery register (031). Base demo address would be 0x2010007C.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by pcie register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by pcie register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by pcie register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by pcie register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CTRL_032", "offset": "0x0080", "doc": "PCIe controller configuration: Control knobs for enabling datapath features (032). Base demo address would be 0x20100080.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by pcie register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by pcie register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__STATUS_033", "offset": "0x0084", "doc": "PCIe controller configuration: Live status bits sampled from hardware (033). Base demo address would be 0x20100084.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by pcie register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by pcie register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__MASK_034", "offset": "0x0088", "doc": "PCIe controller configuration: Interrupt and event mask settings (034). Base demo address would be 0x20100088.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by pcie register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by pcie register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by pcie register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__COUNT_035", "offset": "0x008C", "doc": "PCIe controller configuration: Saturating event counter value (035). Base demo address would be 0x2010008C.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by pcie register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by pcie register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by pcie register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by pcie register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CFG_036", "offset": "0x0090", "doc": "PCIe controller configuration: Programmable configuration fields (036). Base demo address would be 0x20100090.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by pcie register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by pcie register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__ERR_037", "offset": "0x0094", "doc": "PCIe controller configuration: Sticky error indications cleared by writing one (037). Base demo address would be 0x20100094.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by pcie register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by pcie register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by pcie register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by pcie register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__TIMEOUT_038", "offset": "0x0098", "doc": "PCIe controller configuration: Timeout threshold used by local watchdog logic (038). Base demo address would be 0x20100098.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by pcie register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by pcie register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by pcie register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CAP_039", "offset": "0x009C", "doc": "PCIe controller configuration: Capability and feature discovery register (039). Base demo address would be 0x2010009C.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by pcie register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by pcie register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by pcie register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by pcie register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CTRL_040", "offset": "0x00A0", "doc": "PCIe controller configuration: Control knobs for enabling datapath features (040). Base demo address would be 0x201000A0.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by pcie register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by pcie register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__STATUS_041", "offset": "0x00A4", "doc": "PCIe controller configuration: Live status bits sampled from hardware (041). Base demo address would be 0x201000A4.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by pcie register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by pcie register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__MASK_042", "offset": "0x00A8", "doc": "PCIe controller configuration: Interrupt and event mask settings (042). Base demo address would be 0x201000A8.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by pcie register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by pcie register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by pcie register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__COUNT_043", "offset": "0x00AC", "doc": "PCIe controller configuration: Saturating event counter value (043). Base demo address would be 0x201000AC.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by pcie register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by pcie register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by pcie register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by pcie register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CFG_044", "offset": "0x00B0", "doc": "PCIe controller configuration: Programmable configuration fields (044). Base demo address would be 0x201000B0.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by pcie register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by pcie register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__ERR_045", "offset": "0x00B4", "doc": "PCIe controller configuration: Sticky error indications cleared by writing one (045). Base demo address would be 0x201000B4.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by pcie register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by pcie register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by pcie register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by pcie register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__TIMEOUT_046", "offset": "0x00B8", "doc": "PCIe controller configuration: Timeout threshold used by local watchdog logic (046). Base demo address would be 0x201000B8.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by pcie register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by pcie register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by pcie register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by pcie register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by pcie register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PCIE__CAP_047", "offset": "0x00BC", "doc": "PCIe controller configuration: Capability and feature discovery register (047). Base demo address would be 0x201000BC.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by pcie register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by pcie register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by pcie register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by pcie register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by pcie register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by pcie register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__STATUS_000", "offset": "0x0000", "doc": "Protocol hub routing: Live status bits sampled from hardware (000). Base demo address would be 0x20200000.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by phub register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by phub register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__MASK_001", "offset": "0x0004", "doc": "Protocol hub routing: Interrupt and event mask settings (001). Base demo address would be 0x20200004.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by phub register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by phub register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by phub register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__COUNT_002", "offset": "0x0008", "doc": "Protocol hub routing: Saturating event counter value (002). Base demo address would be 0x20200008.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by phub register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by phub register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by phub register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by phub register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CFG_003", "offset": "0x000C", "doc": "Protocol hub routing: Programmable configuration fields (003). Base demo address would be 0x2020000C.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by phub register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by phub register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__ERR_004", "offset": "0x0010", "doc": "Protocol hub routing: Sticky error indications cleared by writing one (004). Base demo address would be 0x20200010.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by phub register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by phub register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by phub register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by phub register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__TIMEOUT_005", "offset": "0x0014", "doc": "Protocol hub routing: Timeout threshold used by local watchdog logic (005). Base demo address would be 0x20200014.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by phub register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by phub register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by phub register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CAP_006", "offset": "0x0018", "doc": "Protocol hub routing: Capability and feature discovery register (006). Base demo address would be 0x20200018.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by phub register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by phub register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by phub register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by phub register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CTRL_007", "offset": "0x001C", "doc": "Protocol hub routing: Control knobs for enabling datapath features (007). Base demo address would be 0x2020001C.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by phub register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by phub register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__STATUS_008", "offset": "0x0020", "doc": "Protocol hub routing: Live status bits sampled from hardware (008). Base demo address would be 0x20200020.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by phub register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by phub register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__MASK_009", "offset": "0x0024", "doc": "Protocol hub routing: Interrupt and event mask settings (009). Base demo address would be 0x20200024.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by phub register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by phub register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by phub register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__COUNT_010", "offset": "0x0028", "doc": "Protocol hub routing: Saturating event counter value (010). Base demo address would be 0x20200028.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by phub register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by phub register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by phub register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by phub register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CFG_011", "offset": "0x002C", "doc": "Protocol hub routing: Programmable configuration fields (011). Base demo address would be 0x2020002C.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by phub register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by phub register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__ERR_012", "offset": "0x0030", "doc": "Protocol hub routing: Sticky error indications cleared by writing one (012). Base demo address would be 0x20200030.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by phub register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by phub register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by phub register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by phub register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__TIMEOUT_013", "offset": "0x0034", "doc": "Protocol hub routing: Timeout threshold used by local watchdog logic (013). Base demo address would be 0x20200034.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by phub register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by phub register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by phub register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CAP_014", "offset": "0x0038", "doc": "Protocol hub routing: Capability and feature discovery register (014). Base demo address would be 0x20200038.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by phub register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by phub register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by phub register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by phub register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CTRL_015", "offset": "0x003C", "doc": "Protocol hub routing: Control knobs for enabling datapath features (015). Base demo address would be 0x2020003C.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by phub register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by phub register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__STATUS_016", "offset": "0x0040", "doc": "Protocol hub routing: Live status bits sampled from hardware (016). Base demo address would be 0x20200040.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by phub register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by phub register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__MASK_017", "offset": "0x0044", "doc": "Protocol hub routing: Interrupt and event mask settings (017). Base demo address would be 0x20200044.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by phub register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by phub register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by phub register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__COUNT_018", "offset": "0x0048", "doc": "Protocol hub routing: Saturating event counter value (018). Base demo address would be 0x20200048.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by phub register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by phub register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by phub register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by phub register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CFG_019", "offset": "0x004C", "doc": "Protocol hub routing: Programmable configuration fields (019). Base demo address would be 0x2020004C.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by phub register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by phub register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__ERR_020", "offset": "0x0050", "doc": "Protocol hub routing: Sticky error indications cleared by writing one (020). Base demo address would be 0x20200050.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by phub register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by phub register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by phub register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by phub register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__TIMEOUT_021", "offset": "0x0054", "doc": "Protocol hub routing: Timeout threshold used by local watchdog logic (021). Base demo address would be 0x20200054.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by phub register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by phub register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by phub register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CAP_022", "offset": "0x0058", "doc": "Protocol hub routing: Capability and feature discovery register (022). Base demo address would be 0x20200058.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by phub register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by phub register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by phub register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by phub register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CTRL_023", "offset": "0x005C", "doc": "Protocol hub routing: Control knobs for enabling datapath features (023). Base demo address would be 0x2020005C.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by phub register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by phub register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__STATUS_024", "offset": "0x0060", "doc": "Protocol hub routing: Live status bits sampled from hardware (024). Base demo address would be 0x20200060.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by phub register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by phub register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__MASK_025", "offset": "0x0064", "doc": "Protocol hub routing: Interrupt and event mask settings (025). Base demo address would be 0x20200064.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by phub register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by phub register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by phub register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__COUNT_026", "offset": "0x0068", "doc": "Protocol hub routing: Saturating event counter value (026). Base demo address would be 0x20200068.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by phub register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by phub register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by phub register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by phub register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CFG_027", "offset": "0x006C", "doc": "Protocol hub routing: Programmable configuration fields (027). Base demo address would be 0x2020006C.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by phub register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by phub register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__ERR_028", "offset": "0x0070", "doc": "Protocol hub routing: Sticky error indications cleared by writing one (028). Base demo address would be 0x20200070.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by phub register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by phub register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by phub register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by phub register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__TIMEOUT_029", "offset": "0x0074", "doc": "Protocol hub routing: Timeout threshold used by local watchdog logic (029). Base demo address would be 0x20200074.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by phub register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by phub register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by phub register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CAP_030", "offset": "0x0078", "doc": "Protocol hub routing: Capability and feature discovery register (030). Base demo address would be 0x20200078.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by phub register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by phub register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by phub register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by phub register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CTRL_031", "offset": "0x007C", "doc": "Protocol hub routing: Control knobs for enabling datapath features (031). Base demo address would be 0x2020007C.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by phub register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by phub register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__STATUS_032", "offset": "0x0080", "doc": "Protocol hub routing: Live status bits sampled from hardware (032). Base demo address would be 0x20200080.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by phub register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by phub register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__MASK_033", "offset": "0x0084", "doc": "Protocol hub routing: Interrupt and event mask settings (033). Base demo address would be 0x20200084.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by phub register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by phub register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by phub register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__COUNT_034", "offset": "0x0088", "doc": "Protocol hub routing: Saturating event counter value (034). Base demo address would be 0x20200088.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by phub register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by phub register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by phub register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by phub register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CFG_035", "offset": "0x008C", "doc": "Protocol hub routing: Programmable configuration fields (035). Base demo address would be 0x2020008C.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by phub register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by phub register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__ERR_036", "offset": "0x0090", "doc": "Protocol hub routing: Sticky error indications cleared by writing one (036). Base demo address would be 0x20200090.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by phub register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by phub register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by phub register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by phub register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__TIMEOUT_037", "offset": "0x0094", "doc": "Protocol hub routing: Timeout threshold used by local watchdog logic (037). Base demo address would be 0x20200094.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by phub register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by phub register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by phub register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CAP_038", "offset": "0x0098", "doc": "Protocol hub routing: Capability and feature discovery register (038). Base demo address would be 0x20200098.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by phub register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by phub register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by phub register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by phub register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CTRL_039", "offset": "0x009C", "doc": "Protocol hub routing: Control knobs for enabling datapath features (039). Base demo address would be 0x2020009C.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by phub register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by phub register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__STATUS_040", "offset": "0x00A0", "doc": "Protocol hub routing: Live status bits sampled from hardware (040). Base demo address would be 0x202000A0.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by phub register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by phub register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__MASK_041", "offset": "0x00A4", "doc": "Protocol hub routing: Interrupt and event mask settings (041). Base demo address would be 0x202000A4.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by phub register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by phub register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by phub register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__COUNT_042", "offset": "0x00A8", "doc": "Protocol hub routing: Saturating event counter value (042). Base demo address would be 0x202000A8.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by phub register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by phub register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by phub register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by phub register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CFG_043", "offset": "0x00AC", "doc": "Protocol hub routing: Programmable configuration fields (043). Base demo address would be 0x202000AC.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by phub register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by phub register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__ERR_044", "offset": "0x00B0", "doc": "Protocol hub routing: Sticky error indications cleared by writing one (044). Base demo address would be 0x202000B0.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by phub register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by phub register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by phub register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by phub register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__TIMEOUT_045", "offset": "0x00B4", "doc": "Protocol hub routing: Timeout threshold used by local watchdog logic (045). Base demo address would be 0x202000B4.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by phub register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by phub register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by phub register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by phub register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CAP_046", "offset": "0x00B8", "doc": "Protocol hub routing: Capability and feature discovery register (046). Base demo address would be 0x202000B8.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by phub register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by phub register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by phub register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by phub register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by phub register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by phub register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__PHUB__CTRL_047", "offset": "0x00BC", "doc": "Protocol hub routing: Control knobs for enabling datapath features (047). Base demo address would be 0x202000BC.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by phub register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by phub register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by phub register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__MASK_000", "offset": "0x0000", "doc": "DMA channel control: Interrupt and event mask settings (000). Base demo address would be 0x20300000.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by dma register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by dma register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by dma register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__COUNT_001", "offset": "0x0004", "doc": "DMA channel control: Saturating event counter value (001). Base demo address would be 0x20300004.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by dma register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by dma register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by dma register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by dma register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CFG_002", "offset": "0x0008", "doc": "DMA channel control: Programmable configuration fields (002). Base demo address would be 0x20300008.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by dma register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by dma register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__ERR_003", "offset": "0x000C", "doc": "DMA channel control: Sticky error indications cleared by writing one (003). Base demo address would be 0x2030000C.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by dma register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by dma register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by dma register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by dma register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__TIMEOUT_004", "offset": "0x0010", "doc": "DMA channel control: Timeout threshold used by local watchdog logic (004). Base demo address would be 0x20300010.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by dma register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by dma register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by dma register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CAP_005", "offset": "0x0014", "doc": "DMA channel control: Capability and feature discovery register (005). Base demo address would be 0x20300014.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by dma register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by dma register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by dma register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by dma register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CTRL_006", "offset": "0x0018", "doc": "DMA channel control: Control knobs for enabling datapath features (006). Base demo address would be 0x20300018.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by dma register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by dma register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__STATUS_007", "offset": "0x001C", "doc": "DMA channel control: Live status bits sampled from hardware (007). Base demo address would be 0x2030001C.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by dma register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by dma register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__MASK_008", "offset": "0x0020", "doc": "DMA channel control: Interrupt and event mask settings (008). Base demo address would be 0x20300020.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by dma register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by dma register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by dma register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__COUNT_009", "offset": "0x0024", "doc": "DMA channel control: Saturating event counter value (009). Base demo address would be 0x20300024.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by dma register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by dma register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by dma register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by dma register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CFG_010", "offset": "0x0028", "doc": "DMA channel control: Programmable configuration fields (010). Base demo address would be 0x20300028.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by dma register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by dma register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__ERR_011", "offset": "0x002C", "doc": "DMA channel control: Sticky error indications cleared by writing one (011). Base demo address would be 0x2030002C.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by dma register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by dma register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by dma register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by dma register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__TIMEOUT_012", "offset": "0x0030", "doc": "DMA channel control: Timeout threshold used by local watchdog logic (012). Base demo address would be 0x20300030.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by dma register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by dma register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by dma register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CAP_013", "offset": "0x0034", "doc": "DMA channel control: Capability and feature discovery register (013). Base demo address would be 0x20300034.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by dma register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by dma register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by dma register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by dma register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CTRL_014", "offset": "0x0038", "doc": "DMA channel control: Control knobs for enabling datapath features (014). Base demo address would be 0x20300038.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by dma register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by dma register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__STATUS_015", "offset": "0x003C", "doc": "DMA channel control: Live status bits sampled from hardware (015). Base demo address would be 0x2030003C.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by dma register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by dma register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__MASK_016", "offset": "0x0040", "doc": "DMA channel control: Interrupt and event mask settings (016). Base demo address would be 0x20300040.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by dma register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by dma register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by dma register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__COUNT_017", "offset": "0x0044", "doc": "DMA channel control: Saturating event counter value (017). Base demo address would be 0x20300044.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by dma register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by dma register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by dma register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by dma register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CFG_018", "offset": "0x0048", "doc": "DMA channel control: Programmable configuration fields (018). Base demo address would be 0x20300048.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by dma register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by dma register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__ERR_019", "offset": "0x004C", "doc": "DMA channel control: Sticky error indications cleared by writing one (019). Base demo address would be 0x2030004C.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by dma register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by dma register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by dma register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by dma register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__TIMEOUT_020", "offset": "0x0050", "doc": "DMA channel control: Timeout threshold used by local watchdog logic (020). Base demo address would be 0x20300050.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by dma register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by dma register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by dma register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CAP_021", "offset": "0x0054", "doc": "DMA channel control: Capability and feature discovery register (021). Base demo address would be 0x20300054.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by dma register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by dma register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by dma register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by dma register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CTRL_022", "offset": "0x0058", "doc": "DMA channel control: Control knobs for enabling datapath features (022). Base demo address would be 0x20300058.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by dma register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by dma register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__STATUS_023", "offset": "0x005C", "doc": "DMA channel control: Live status bits sampled from hardware (023). Base demo address would be 0x2030005C.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by dma register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by dma register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__MASK_024", "offset": "0x0060", "doc": "DMA channel control: Interrupt and event mask settings (024). Base demo address would be 0x20300060.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by dma register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by dma register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by dma register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__COUNT_025", "offset": "0x0064", "doc": "DMA channel control: Saturating event counter value (025). Base demo address would be 0x20300064.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by dma register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by dma register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by dma register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by dma register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CFG_026", "offset": "0x0068", "doc": "DMA channel control: Programmable configuration fields (026). Base demo address would be 0x20300068.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by dma register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by dma register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__ERR_027", "offset": "0x006C", "doc": "DMA channel control: Sticky error indications cleared by writing one (027). Base demo address would be 0x2030006C.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by dma register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by dma register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by dma register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by dma register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__TIMEOUT_028", "offset": "0x0070", "doc": "DMA channel control: Timeout threshold used by local watchdog logic (028). Base demo address would be 0x20300070.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by dma register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by dma register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by dma register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CAP_029", "offset": "0x0074", "doc": "DMA channel control: Capability and feature discovery register (029). Base demo address would be 0x20300074.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by dma register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by dma register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by dma register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by dma register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CTRL_030", "offset": "0x0078", "doc": "DMA channel control: Control knobs for enabling datapath features (030). Base demo address would be 0x20300078.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by dma register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by dma register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__STATUS_031", "offset": "0x007C", "doc": "DMA channel control: Live status bits sampled from hardware (031). Base demo address would be 0x2030007C.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by dma register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by dma register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__MASK_032", "offset": "0x0080", "doc": "DMA channel control: Interrupt and event mask settings (032). Base demo address would be 0x20300080.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by dma register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by dma register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by dma register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__COUNT_033", "offset": "0x0084", "doc": "DMA channel control: Saturating event counter value (033). Base demo address would be 0x20300084.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by dma register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by dma register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by dma register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by dma register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CFG_034", "offset": "0x0088", "doc": "DMA channel control: Programmable configuration fields (034). Base demo address would be 0x20300088.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by dma register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by dma register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__ERR_035", "offset": "0x008C", "doc": "DMA channel control: Sticky error indications cleared by writing one (035). Base demo address would be 0x2030008C.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by dma register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by dma register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by dma register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by dma register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__TIMEOUT_036", "offset": "0x0090", "doc": "DMA channel control: Timeout threshold used by local watchdog logic (036). Base demo address would be 0x20300090.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by dma register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by dma register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by dma register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CAP_037", "offset": "0x0094", "doc": "DMA channel control: Capability and feature discovery register (037). Base demo address would be 0x20300094.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by dma register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by dma register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by dma register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by dma register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CTRL_038", "offset": "0x0098", "doc": "DMA channel control: Control knobs for enabling datapath features (038). Base demo address would be 0x20300098.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by dma register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by dma register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__STATUS_039", "offset": "0x009C", "doc": "DMA channel control: Live status bits sampled from hardware (039). Base demo address would be 0x2030009C.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by dma register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by dma register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__MASK_040", "offset": "0x00A0", "doc": "DMA channel control: Interrupt and event mask settings (040). Base demo address would be 0x203000A0.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by dma register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by dma register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by dma register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__COUNT_041", "offset": "0x00A4", "doc": "DMA channel control: Saturating event counter value (041). Base demo address would be 0x203000A4.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by dma register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by dma register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by dma register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by dma register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CFG_042", "offset": "0x00A8", "doc": "DMA channel control: Programmable configuration fields (042). Base demo address would be 0x203000A8.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by dma register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by dma register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__ERR_043", "offset": "0x00AC", "doc": "DMA channel control: Sticky error indications cleared by writing one (043). Base demo address would be 0x203000AC.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by dma register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by dma register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by dma register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by dma register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__TIMEOUT_044", "offset": "0x00B0", "doc": "DMA channel control: Timeout threshold used by local watchdog logic (044). Base demo address would be 0x203000B0.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by dma register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by dma register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by dma register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by dma register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CAP_045", "offset": "0x00B4", "doc": "DMA channel control: Capability and feature discovery register (045). Base demo address would be 0x203000B4.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by dma register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by dma register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by dma register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by dma register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__CTRL_046", "offset": "0x00B8", "doc": "DMA channel control: Control knobs for enabling datapath features (046). Base demo address would be 0x203000B8.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by dma register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by dma register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by dma register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DMA__STATUS_047", "offset": "0x00BC", "doc": "DMA channel control: Live status bits sampled from hardware (047). Base demo address would be 0x203000BC.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by dma register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by dma register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by dma register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by dma register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__COUNT_000", "offset": "0x0000", "doc": "MSI interrupt delivery: Saturating event counter value (000). Base demo address would be 0x20400000.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by msi register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by msi register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by msi register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by msi register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CFG_001", "offset": "0x0004", "doc": "MSI interrupt delivery: Programmable configuration fields (001). Base demo address would be 0x20400004.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by msi register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by msi register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__ERR_002", "offset": "0x0008", "doc": "MSI interrupt delivery: Sticky error indications cleared by writing one (002). Base demo address would be 0x20400008.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by msi register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by msi register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by msi register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by msi register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__TIMEOUT_003", "offset": "0x000C", "doc": "MSI interrupt delivery: Timeout threshold used by local watchdog logic (003). Base demo address would be 0x2040000C.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by msi register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by msi register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by msi register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CAP_004", "offset": "0x0010", "doc": "MSI interrupt delivery: Capability and feature discovery register (004). Base demo address would be 0x20400010.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by msi register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by msi register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by msi register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by msi register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CTRL_005", "offset": "0x0014", "doc": "MSI interrupt delivery: Control knobs for enabling datapath features (005). Base demo address would be 0x20400014.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by msi register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by msi register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__STATUS_006", "offset": "0x0018", "doc": "MSI interrupt delivery: Live status bits sampled from hardware (006). Base demo address would be 0x20400018.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by msi register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by msi register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__MASK_007", "offset": "0x001C", "doc": "MSI interrupt delivery: Interrupt and event mask settings (007). Base demo address would be 0x2040001C.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by msi register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by msi register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by msi register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__COUNT_008", "offset": "0x0020", "doc": "MSI interrupt delivery: Saturating event counter value (008). Base demo address would be 0x20400020.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by msi register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by msi register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by msi register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by msi register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CFG_009", "offset": "0x0024", "doc": "MSI interrupt delivery: Programmable configuration fields (009). Base demo address would be 0x20400024.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by msi register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by msi register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__ERR_010", "offset": "0x0028", "doc": "MSI interrupt delivery: Sticky error indications cleared by writing one (010). Base demo address would be 0x20400028.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by msi register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by msi register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by msi register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by msi register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__TIMEOUT_011", "offset": "0x002C", "doc": "MSI interrupt delivery: Timeout threshold used by local watchdog logic (011). Base demo address would be 0x2040002C.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by msi register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by msi register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by msi register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CAP_012", "offset": "0x0030", "doc": "MSI interrupt delivery: Capability and feature discovery register (012). Base demo address would be 0x20400030.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by msi register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by msi register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by msi register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by msi register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CTRL_013", "offset": "0x0034", "doc": "MSI interrupt delivery: Control knobs for enabling datapath features (013). Base demo address would be 0x20400034.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by msi register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by msi register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__STATUS_014", "offset": "0x0038", "doc": "MSI interrupt delivery: Live status bits sampled from hardware (014). Base demo address would be 0x20400038.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by msi register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by msi register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__MASK_015", "offset": "0x003C", "doc": "MSI interrupt delivery: Interrupt and event mask settings (015). Base demo address would be 0x2040003C.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by msi register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by msi register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by msi register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__COUNT_016", "offset": "0x0040", "doc": "MSI interrupt delivery: Saturating event counter value (016). Base demo address would be 0x20400040.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by msi register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by msi register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by msi register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by msi register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CFG_017", "offset": "0x0044", "doc": "MSI interrupt delivery: Programmable configuration fields (017). Base demo address would be 0x20400044.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by msi register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by msi register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__ERR_018", "offset": "0x0048", "doc": "MSI interrupt delivery: Sticky error indications cleared by writing one (018). Base demo address would be 0x20400048.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by msi register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by msi register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by msi register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by msi register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__TIMEOUT_019", "offset": "0x004C", "doc": "MSI interrupt delivery: Timeout threshold used by local watchdog logic (019). Base demo address would be 0x2040004C.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by msi register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by msi register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by msi register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CAP_020", "offset": "0x0050", "doc": "MSI interrupt delivery: Capability and feature discovery register (020). Base demo address would be 0x20400050.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by msi register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by msi register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by msi register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by msi register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CTRL_021", "offset": "0x0054", "doc": "MSI interrupt delivery: Control knobs for enabling datapath features (021). Base demo address would be 0x20400054.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by msi register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by msi register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__STATUS_022", "offset": "0x0058", "doc": "MSI interrupt delivery: Live status bits sampled from hardware (022). Base demo address would be 0x20400058.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by msi register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by msi register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__MASK_023", "offset": "0x005C", "doc": "MSI interrupt delivery: Interrupt and event mask settings (023). Base demo address would be 0x2040005C.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by msi register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by msi register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by msi register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__COUNT_024", "offset": "0x0060", "doc": "MSI interrupt delivery: Saturating event counter value (024). Base demo address would be 0x20400060.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by msi register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by msi register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by msi register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by msi register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CFG_025", "offset": "0x0064", "doc": "MSI interrupt delivery: Programmable configuration fields (025). Base demo address would be 0x20400064.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by msi register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by msi register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__ERR_026", "offset": "0x0068", "doc": "MSI interrupt delivery: Sticky error indications cleared by writing one (026). Base demo address would be 0x20400068.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by msi register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by msi register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by msi register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by msi register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__TIMEOUT_027", "offset": "0x006C", "doc": "MSI interrupt delivery: Timeout threshold used by local watchdog logic (027). Base demo address would be 0x2040006C.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by msi register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by msi register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by msi register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CAP_028", "offset": "0x0070", "doc": "MSI interrupt delivery: Capability and feature discovery register (028). Base demo address would be 0x20400070.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by msi register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by msi register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by msi register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by msi register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CTRL_029", "offset": "0x0074", "doc": "MSI interrupt delivery: Control knobs for enabling datapath features (029). Base demo address would be 0x20400074.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by msi register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by msi register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__STATUS_030", "offset": "0x0078", "doc": "MSI interrupt delivery: Live status bits sampled from hardware (030). Base demo address would be 0x20400078.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by msi register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by msi register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__MASK_031", "offset": "0x007C", "doc": "MSI interrupt delivery: Interrupt and event mask settings (031). Base demo address would be 0x2040007C.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by msi register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by msi register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by msi register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__COUNT_032", "offset": "0x0080", "doc": "MSI interrupt delivery: Saturating event counter value (032). Base demo address would be 0x20400080.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by msi register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by msi register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by msi register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by msi register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CFG_033", "offset": "0x0084", "doc": "MSI interrupt delivery: Programmable configuration fields (033). Base demo address would be 0x20400084.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by msi register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by msi register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__ERR_034", "offset": "0x0088", "doc": "MSI interrupt delivery: Sticky error indications cleared by writing one (034). Base demo address would be 0x20400088.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by msi register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by msi register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by msi register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by msi register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__TIMEOUT_035", "offset": "0x008C", "doc": "MSI interrupt delivery: Timeout threshold used by local watchdog logic (035). Base demo address would be 0x2040008C.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by msi register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by msi register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by msi register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CAP_036", "offset": "0x0090", "doc": "MSI interrupt delivery: Capability and feature discovery register (036). Base demo address would be 0x20400090.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by msi register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by msi register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by msi register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by msi register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CTRL_037", "offset": "0x0094", "doc": "MSI interrupt delivery: Control knobs for enabling datapath features (037). Base demo address would be 0x20400094.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by msi register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by msi register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__STATUS_038", "offset": "0x0098", "doc": "MSI interrupt delivery: Live status bits sampled from hardware (038). Base demo address would be 0x20400098.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by msi register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by msi register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__MASK_039", "offset": "0x009C", "doc": "MSI interrupt delivery: Interrupt and event mask settings (039). Base demo address would be 0x2040009C.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by msi register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by msi register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by msi register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__COUNT_040", "offset": "0x00A0", "doc": "MSI interrupt delivery: Saturating event counter value (040). Base demo address would be 0x204000A0.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by msi register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by msi register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by msi register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by msi register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CFG_041", "offset": "0x00A4", "doc": "MSI interrupt delivery: Programmable configuration fields (041). Base demo address would be 0x204000A4.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by msi register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by msi register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__ERR_042", "offset": "0x00A8", "doc": "MSI interrupt delivery: Sticky error indications cleared by writing one (042). Base demo address would be 0x204000A8.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by msi register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by msi register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by msi register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by msi register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__TIMEOUT_043", "offset": "0x00AC", "doc": "MSI interrupt delivery: Timeout threshold used by local watchdog logic (043). Base demo address would be 0x204000AC.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by msi register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by msi register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by msi register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CAP_044", "offset": "0x00B0", "doc": "MSI interrupt delivery: Capability and feature discovery register (044). Base demo address would be 0x204000B0.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by msi register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by msi register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by msi register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by msi register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__CTRL_045", "offset": "0x00B4", "doc": "MSI interrupt delivery: Control knobs for enabling datapath features (045). Base demo address would be 0x204000B4.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by msi register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by msi register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__STATUS_046", "offset": "0x00B8", "doc": "MSI interrupt delivery: Live status bits sampled from hardware (046). Base demo address would be 0x204000B8.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by msi register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by msi register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by msi register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by msi register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__MSI__MASK_047", "offset": "0x00BC", "doc": "MSI interrupt delivery: Interrupt and event mask settings (047). Base demo address would be 0x204000BC.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by msi register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by msi register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by msi register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by msi register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by msi register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CFG_000", "offset": "0x0000", "doc": "Address translation unit: Programmable configuration fields (000). Base demo address would be 0x20500000.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by atu register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by atu register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__ERR_001", "offset": "0x0004", "doc": "Address translation unit: Sticky error indications cleared by writing one (001). Base demo address would be 0x20500004.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by atu register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by atu register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by atu register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by atu register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__TIMEOUT_002", "offset": "0x0008", "doc": "Address translation unit: Timeout threshold used by local watchdog logic (002). Base demo address would be 0x20500008.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by atu register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by atu register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by atu register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CAP_003", "offset": "0x000C", "doc": "Address translation unit: Capability and feature discovery register (003). Base demo address would be 0x2050000C.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by atu register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by atu register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by atu register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by atu register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CTRL_004", "offset": "0x0010", "doc": "Address translation unit: Control knobs for enabling datapath features (004). Base demo address would be 0x20500010.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by atu register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by atu register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__STATUS_005", "offset": "0x0014", "doc": "Address translation unit: Live status bits sampled from hardware (005). Base demo address would be 0x20500014.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by atu register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by atu register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__MASK_006", "offset": "0x0018", "doc": "Address translation unit: Interrupt and event mask settings (006). Base demo address would be 0x20500018.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by atu register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by atu register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by atu register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__COUNT_007", "offset": "0x001C", "doc": "Address translation unit: Saturating event counter value (007). Base demo address would be 0x2050001C.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by atu register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by atu register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by atu register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by atu register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CFG_008", "offset": "0x0020", "doc": "Address translation unit: Programmable configuration fields (008). Base demo address would be 0x20500020.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by atu register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by atu register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__ERR_009", "offset": "0x0024", "doc": "Address translation unit: Sticky error indications cleared by writing one (009). Base demo address would be 0x20500024.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by atu register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by atu register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by atu register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by atu register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__TIMEOUT_010", "offset": "0x0028", "doc": "Address translation unit: Timeout threshold used by local watchdog logic (010). Base demo address would be 0x20500028.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by atu register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by atu register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by atu register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CAP_011", "offset": "0x002C", "doc": "Address translation unit: Capability and feature discovery register (011). Base demo address would be 0x2050002C.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by atu register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by atu register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by atu register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by atu register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CTRL_012", "offset": "0x0030", "doc": "Address translation unit: Control knobs for enabling datapath features (012). Base demo address would be 0x20500030.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by atu register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by atu register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__STATUS_013", "offset": "0x0034", "doc": "Address translation unit: Live status bits sampled from hardware (013). Base demo address would be 0x20500034.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by atu register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by atu register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__MASK_014", "offset": "0x0038", "doc": "Address translation unit: Interrupt and event mask settings (014). Base demo address would be 0x20500038.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by atu register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by atu register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by atu register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__COUNT_015", "offset": "0x003C", "doc": "Address translation unit: Saturating event counter value (015). Base demo address would be 0x2050003C.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by atu register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by atu register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by atu register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by atu register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CFG_016", "offset": "0x0040", "doc": "Address translation unit: Programmable configuration fields (016). Base demo address would be 0x20500040.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by atu register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by atu register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__ERR_017", "offset": "0x0044", "doc": "Address translation unit: Sticky error indications cleared by writing one (017). Base demo address would be 0x20500044.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by atu register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by atu register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by atu register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by atu register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__TIMEOUT_018", "offset": "0x0048", "doc": "Address translation unit: Timeout threshold used by local watchdog logic (018). Base demo address would be 0x20500048.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by atu register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by atu register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by atu register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CAP_019", "offset": "0x004C", "doc": "Address translation unit: Capability and feature discovery register (019). Base demo address would be 0x2050004C.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by atu register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by atu register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by atu register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by atu register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CTRL_020", "offset": "0x0050", "doc": "Address translation unit: Control knobs for enabling datapath features (020). Base demo address would be 0x20500050.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by atu register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by atu register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__STATUS_021", "offset": "0x0054", "doc": "Address translation unit: Live status bits sampled from hardware (021). Base demo address would be 0x20500054.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by atu register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by atu register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__MASK_022", "offset": "0x0058", "doc": "Address translation unit: Interrupt and event mask settings (022). Base demo address would be 0x20500058.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by atu register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by atu register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by atu register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__COUNT_023", "offset": "0x005C", "doc": "Address translation unit: Saturating event counter value (023). Base demo address would be 0x2050005C.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by atu register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by atu register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by atu register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by atu register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CFG_024", "offset": "0x0060", "doc": "Address translation unit: Programmable configuration fields (024). Base demo address would be 0x20500060.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by atu register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by atu register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__ERR_025", "offset": "0x0064", "doc": "Address translation unit: Sticky error indications cleared by writing one (025). Base demo address would be 0x20500064.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by atu register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by atu register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by atu register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by atu register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__TIMEOUT_026", "offset": "0x0068", "doc": "Address translation unit: Timeout threshold used by local watchdog logic (026). Base demo address would be 0x20500068.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by atu register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by atu register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by atu register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CAP_027", "offset": "0x006C", "doc": "Address translation unit: Capability and feature discovery register (027). Base demo address would be 0x2050006C.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by atu register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by atu register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by atu register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by atu register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CTRL_028", "offset": "0x0070", "doc": "Address translation unit: Control knobs for enabling datapath features (028). Base demo address would be 0x20500070.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by atu register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by atu register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__STATUS_029", "offset": "0x0074", "doc": "Address translation unit: Live status bits sampled from hardware (029). Base demo address would be 0x20500074.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by atu register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by atu register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__MASK_030", "offset": "0x0078", "doc": "Address translation unit: Interrupt and event mask settings (030). Base demo address would be 0x20500078.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by atu register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by atu register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by atu register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__COUNT_031", "offset": "0x007C", "doc": "Address translation unit: Saturating event counter value (031). Base demo address would be 0x2050007C.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by atu register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by atu register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by atu register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by atu register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CFG_032", "offset": "0x0080", "doc": "Address translation unit: Programmable configuration fields (032). Base demo address would be 0x20500080.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by atu register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by atu register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__ERR_033", "offset": "0x0084", "doc": "Address translation unit: Sticky error indications cleared by writing one (033). Base demo address would be 0x20500084.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by atu register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by atu register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by atu register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by atu register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__TIMEOUT_034", "offset": "0x0088", "doc": "Address translation unit: Timeout threshold used by local watchdog logic (034). Base demo address would be 0x20500088.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by atu register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by atu register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by atu register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CAP_035", "offset": "0x008C", "doc": "Address translation unit: Capability and feature discovery register (035). Base demo address would be 0x2050008C.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by atu register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by atu register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by atu register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by atu register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CTRL_036", "offset": "0x0090", "doc": "Address translation unit: Control knobs for enabling datapath features (036). Base demo address would be 0x20500090.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by atu register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by atu register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__STATUS_037", "offset": "0x0094", "doc": "Address translation unit: Live status bits sampled from hardware (037). Base demo address would be 0x20500094.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by atu register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by atu register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__MASK_038", "offset": "0x0098", "doc": "Address translation unit: Interrupt and event mask settings (038). Base demo address would be 0x20500098.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by atu register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by atu register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by atu register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__COUNT_039", "offset": "0x009C", "doc": "Address translation unit: Saturating event counter value (039). Base demo address would be 0x2050009C.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by atu register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by atu register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by atu register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by atu register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CFG_040", "offset": "0x00A0", "doc": "Address translation unit: Programmable configuration fields (040). Base demo address would be 0x205000A0.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by atu register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by atu register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__ERR_041", "offset": "0x00A4", "doc": "Address translation unit: Sticky error indications cleared by writing one (041). Base demo address would be 0x205000A4.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by atu register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by atu register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by atu register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by atu register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__TIMEOUT_042", "offset": "0x00A8", "doc": "Address translation unit: Timeout threshold used by local watchdog logic (042). Base demo address would be 0x205000A8.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by atu register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by atu register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by atu register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CAP_043", "offset": "0x00AC", "doc": "Address translation unit: Capability and feature discovery register (043). Base demo address would be 0x205000AC.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by atu register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by atu register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by atu register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by atu register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__CTRL_044", "offset": "0x00B0", "doc": "Address translation unit: Control knobs for enabling datapath features (044). Base demo address would be 0x205000B0.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by atu register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by atu register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__STATUS_045", "offset": "0x00B4", "doc": "Address translation unit: Live status bits sampled from hardware (045). Base demo address would be 0x205000B4.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by atu register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by atu register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__MASK_046", "offset": "0x00B8", "doc": "Address translation unit: Interrupt and event mask settings (046). Base demo address would be 0x205000B8.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by atu register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by atu register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by atu register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by atu register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by atu register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__ATU__COUNT_047", "offset": "0x00BC", "doc": "Address translation unit: Saturating event counter value (047). Base demo address would be 0x205000BC.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by atu register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by atu register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by atu register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by atu register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by atu register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by atu register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__ERR_000", "offset": "0x0000", "doc": "Debug and observability: Sticky error indications cleared by writing one (000). Base demo address would be 0x20600000.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by debug register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by debug register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by debug register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by debug register 000.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__TIMEOUT_001", "offset": "0x0004", "doc": "Debug and observability: Timeout threshold used by local watchdog logic (001). Base demo address would be 0x20600004.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by debug register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by debug register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by debug register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 001.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CAP_002", "offset": "0x0008", "doc": "Debug and observability: Capability and feature discovery register (002). Base demo address would be 0x20600008.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by debug register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by debug register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by debug register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by debug register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 002.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CTRL_003", "offset": "0x000C", "doc": "Debug and observability: Control knobs for enabling datapath features (003). Base demo address would be 0x2060000C.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by debug register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by debug register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 003.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__STATUS_004", "offset": "0x0010", "doc": "Debug and observability: Live status bits sampled from hardware (004). Base demo address would be 0x20600010.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by debug register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by debug register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 004.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__MASK_005", "offset": "0x0014", "doc": "Debug and observability: Interrupt and event mask settings (005). Base demo address would be 0x20600014.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by debug register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by debug register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by debug register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 005.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__COUNT_006", "offset": "0x0018", "doc": "Debug and observability: Saturating event counter value (006). Base demo address would be 0x20600018.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by debug register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by debug register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by debug register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by debug register 006.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CFG_007", "offset": "0x001C", "doc": "Debug and observability: Programmable configuration fields (007). Base demo address would be 0x2060001C.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by debug register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by debug register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 007.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__ERR_008", "offset": "0x0020", "doc": "Debug and observability: Sticky error indications cleared by writing one (008). Base demo address would be 0x20600020.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by debug register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by debug register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by debug register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by debug register 008.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__TIMEOUT_009", "offset": "0x0024", "doc": "Debug and observability: Timeout threshold used by local watchdog logic (009). Base demo address would be 0x20600024.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by debug register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by debug register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by debug register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 009.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CAP_010", "offset": "0x0028", "doc": "Debug and observability: Capability and feature discovery register (010). Base demo address would be 0x20600028.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by debug register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by debug register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by debug register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by debug register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 010.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CTRL_011", "offset": "0x002C", "doc": "Debug and observability: Control knobs for enabling datapath features (011). Base demo address would be 0x2060002C.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by debug register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by debug register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 011.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__STATUS_012", "offset": "0x0030", "doc": "Debug and observability: Live status bits sampled from hardware (012). Base demo address would be 0x20600030.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by debug register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by debug register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 012.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__MASK_013", "offset": "0x0034", "doc": "Debug and observability: Interrupt and event mask settings (013). Base demo address would be 0x20600034.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by debug register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by debug register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by debug register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 013.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__COUNT_014", "offset": "0x0038", "doc": "Debug and observability: Saturating event counter value (014). Base demo address would be 0x20600038.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by debug register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by debug register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by debug register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by debug register 014.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CFG_015", "offset": "0x003C", "doc": "Debug and observability: Programmable configuration fields (015). Base demo address would be 0x2060003C.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by debug register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by debug register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 015.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__ERR_016", "offset": "0x0040", "doc": "Debug and observability: Sticky error indications cleared by writing one (016). Base demo address would be 0x20600040.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by debug register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by debug register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by debug register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by debug register 016.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__TIMEOUT_017", "offset": "0x0044", "doc": "Debug and observability: Timeout threshold used by local watchdog logic (017). Base demo address would be 0x20600044.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by debug register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by debug register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by debug register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 017.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CAP_018", "offset": "0x0048", "doc": "Debug and observability: Capability and feature discovery register (018). Base demo address would be 0x20600048.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by debug register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by debug register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by debug register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by debug register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 018.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CTRL_019", "offset": "0x004C", "doc": "Debug and observability: Control knobs for enabling datapath features (019). Base demo address would be 0x2060004C.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by debug register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by debug register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 019.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__STATUS_020", "offset": "0x0050", "doc": "Debug and observability: Live status bits sampled from hardware (020). Base demo address would be 0x20600050.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by debug register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by debug register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 020.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__MASK_021", "offset": "0x0054", "doc": "Debug and observability: Interrupt and event mask settings (021). Base demo address would be 0x20600054.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by debug register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by debug register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by debug register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 021.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__COUNT_022", "offset": "0x0058", "doc": "Debug and observability: Saturating event counter value (022). Base demo address would be 0x20600058.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by debug register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by debug register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by debug register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by debug register 022.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CFG_023", "offset": "0x005C", "doc": "Debug and observability: Programmable configuration fields (023). Base demo address would be 0x2060005C.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by debug register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by debug register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 023.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__ERR_024", "offset": "0x0060", "doc": "Debug and observability: Sticky error indications cleared by writing one (024). Base demo address would be 0x20600060.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by debug register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by debug register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by debug register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by debug register 024.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__TIMEOUT_025", "offset": "0x0064", "doc": "Debug and observability: Timeout threshold used by local watchdog logic (025). Base demo address would be 0x20600064.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by debug register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by debug register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by debug register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 025.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CAP_026", "offset": "0x0068", "doc": "Debug and observability: Capability and feature discovery register (026). Base demo address would be 0x20600068.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by debug register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by debug register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by debug register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by debug register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 026.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CTRL_027", "offset": "0x006C", "doc": "Debug and observability: Control knobs for enabling datapath features (027). Base demo address would be 0x2060006C.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by debug register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by debug register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 027.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__STATUS_028", "offset": "0x0070", "doc": "Debug and observability: Live status bits sampled from hardware (028). Base demo address would be 0x20600070.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by debug register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by debug register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 028.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__MASK_029", "offset": "0x0074", "doc": "Debug and observability: Interrupt and event mask settings (029). Base demo address would be 0x20600074.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by debug register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by debug register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by debug register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 029.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__COUNT_030", "offset": "0x0078", "doc": "Debug and observability: Saturating event counter value (030). Base demo address would be 0x20600078.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by debug register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by debug register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by debug register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by debug register 030.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CFG_031", "offset": "0x007C", "doc": "Debug and observability: Programmable configuration fields (031). Base demo address would be 0x2060007C.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by debug register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by debug register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 031.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__ERR_032", "offset": "0x0080", "doc": "Debug and observability: Sticky error indications cleared by writing one (032). Base demo address would be 0x20600080.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by debug register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by debug register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by debug register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by debug register 032.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__TIMEOUT_033", "offset": "0x0084", "doc": "Debug and observability: Timeout threshold used by local watchdog logic (033). Base demo address would be 0x20600084.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by debug register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by debug register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by debug register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 033.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CAP_034", "offset": "0x0088", "doc": "Debug and observability: Capability and feature discovery register (034). Base demo address would be 0x20600088.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by debug register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by debug register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by debug register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by debug register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 034.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CTRL_035", "offset": "0x008C", "doc": "Debug and observability: Control knobs for enabling datapath features (035). Base demo address would be 0x2060008C.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by debug register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by debug register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 035.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__STATUS_036", "offset": "0x0090", "doc": "Debug and observability: Live status bits sampled from hardware (036). Base demo address would be 0x20600090.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by debug register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by debug register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 036.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__MASK_037", "offset": "0x0094", "doc": "Debug and observability: Interrupt and event mask settings (037). Base demo address would be 0x20600094.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by debug register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by debug register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by debug register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 037.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__COUNT_038", "offset": "0x0098", "doc": "Debug and observability: Saturating event counter value (038). Base demo address would be 0x20600098.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by debug register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by debug register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by debug register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by debug register 038.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CFG_039", "offset": "0x009C", "doc": "Debug and observability: Programmable configuration fields (039). Base demo address would be 0x2060009C.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by debug register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by debug register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 039.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__ERR_040", "offset": "0x00A0", "doc": "Debug and observability: Sticky error indications cleared by writing one (040). Base demo address would be 0x206000A0.", "fields": { "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW1C", "doc": [ "Programmable threshold value; used by debug register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW1C", "doc": [ "Destination or requester identifier; used by debug register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW1C", "doc": [ "Encoded hardware revision; used by debug register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW1C", "doc": [ "Enables this feature when set; used by debug register 040.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__TIMEOUT_041", "offset": "0x00A4", "doc": "Debug and observability: Timeout threshold used by local watchdog logic (041). Base demo address would be 0x206000A4.", "fields": { "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RW", "doc": [ "Encoded hardware revision; used by debug register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by debug register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by debug register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 041.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CAP_042", "offset": "0x00A8", "doc": "Debug and observability: Capability and feature discovery register (042). Base demo address would be 0x206000A8.", "fields": { "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by debug register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by debug register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by debug register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by debug register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 042.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CTRL_043", "offset": "0x00AC", "doc": "Debug and observability: Control knobs for enabling datapath features (043). Base demo address would be 0x206000AC.", "fields": { "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RW", "doc": [ "Enables this feature when set; used by debug register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RW", "doc": [ "Indicates that the block completed initialization; used by debug register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 043.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__STATUS_044", "offset": "0x00B0", "doc": "Debug and observability: Live status bits sampled from hardware (044). Base demo address would be 0x206000B0.", "fields": { "ready": { "bit_range": { "low": 1, "high": 1, "shift": 1, "width": 1, "mask": 2 }, "reset": 0, "access": "RO", "doc": [ "Indicates that the block completed initialization; used by debug register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RO", "doc": [ "Shows that an internal transaction is active; used by debug register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 044.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__MASK_045", "offset": "0x00B4", "doc": "Debug and observability: Interrupt and event mask settings (045). Base demo address would be 0x206000B4.", "fields": { "busy": { "bit_range": { "low": 2, "high": 2, "shift": 2, "width": 1, "mask": 4 }, "reset": 0, "access": "RW", "doc": [ "Shows that an internal transaction is active; used by debug register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RW", "doc": [ "Sticky error summary bit; used by debug register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by debug register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by debug register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 045.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__COUNT_046", "offset": "0x00B8", "doc": "Debug and observability: Saturating event counter value (046). Base demo address would be 0x206000B8.", "fields": { "error": { "bit_range": { "low": 3, "high": 3, "shift": 3, "width": 1, "mask": 8 }, "reset": 0, "access": "RO", "doc": [ "Sticky error summary bit; used by debug register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RO", "doc": [ "Selects the operating mode; used by debug register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RO", "doc": [ "Programmable threshold value; used by debug register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RO", "doc": [ "Destination or requester identifier; used by debug register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "version": { "bit_range": { "low": 24, "high": 31, "shift": 24, "width": 8, "mask": 4278190080 }, "reset": 1, "access": "RO", "doc": [ "Encoded hardware revision; used by debug register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "enable": { "bit_range": { "low": 0, "high": 0, "shift": 0, "width": 1, "mask": 1 }, "reset": 0, "access": "RO", "doc": [ "Enables this feature when set; used by debug register 046.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } }, { "name": "REG__XPG__DEBUG__CFG_047", "offset": "0x00BC", "doc": "Debug and observability: Programmable configuration fields (047). Base demo address would be 0x206000BC.", "fields": { "mode": { "bit_range": { "low": 4, "high": 7, "shift": 4, "width": 4, "mask": 240 }, "reset": 0, "access": "RW", "doc": [ "Selects the operating mode; used by debug register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "threshold": { "bit_range": { "low": 8, "high": 15, "shift": 8, "width": 8, "mask": 65280 }, "reset": 32, "access": "RW", "doc": [ "Programmable threshold value; used by debug register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] }, "target_id": { "bit_range": { "low": 16, "high": 23, "shift": 16, "width": 8, "mask": 16711680 }, "reset": 0, "access": "RW", "doc": [ "Destination or requester identifier; used by debug register 047.", "This field is generated in the flat RNOC demo format for field-description display testing." ] } } } ]